Vsp735 Administrator And Provisioning Manual; Tone" Module: Tone Definition Settings - VTech VSP735 Administrator And Provisioning Manual

"tone" Module: Tone Definition Settings

The Tone Definition settings configure data for various tones for the purpose of
localization. The Audio Manager component uses the data from this model to
populate the mcu on bootup.
Each tone definition must be a string of 12 elements separated by a space:
"<num of freq> <freq1> <amp1> <freq2> <amp2> <freq3> <amp3> <freq4> <amp4> <on duration>
<off duration> <repeat count>"
Where:
<num of freq>: 0–4
<freq1>: 0–65535
<amp1>: -32768–32767
<freq2>: 0-65535
<amp2>: -32768-32767
<freq3>: 0-65535
<amp3>: -32768-32767
<freq4>: 0-65535
<amp4>: -32768-32767
<on duration>: 0-2^32
<off duration>: 0-2^32
<repeat count>: 0-65535
All the tone definition settings are included in the general configuration file.
Setting:
tone.call_waiting_tone.num_of_elements
Description: Sets the number of elements for the call waiting tone.
Values: 1–5
Setting:
tone.call_waiting_tone.element.1
Description: Defines the call waiting tone element 1.
Values: Tone element string
Setting:
tone.call_waiting_tone.element.x
Description: Defines the call waiting tone element x.
Values: Tone element string

VSP735 Administrator and Provisioning Manual

Default:
Default:
Default:
144 Appendix A: Configuration File Settings
1
1 440 -120 0 0 0 0 0 0
500 0 1
Blank