Software Update; Manual Update; Auto Provisioning - VTech ErisTerminal ET605 User Manual

ET605 User Manual
S
oftware update
M
anual update
1. Open a browser and enter the address https://businessphones.vtech.com.
2. Point to Products and click SIP Phones.
3. Click ET600 Series.
4. Scroll down the page and click the ErisTerminal® SIP Deskset ET605 link.
5. Click Downloads.
6. Click on the firmware version currently running on your phone.
7. Right-click on the link of the firmware version you want to update to.
8. Click on Copy link location or Copy link address (wording depends on your browser).
9. Open the phone's web interface > Software Update page.
10. In the Manual Software Update area, paste the link into the text field of "Firmware".
11. Click on Load. The phone begins to reboot.
12. If the phone asks "Reboot?", press
13. DO NOT DISCONNECT THE POWER WHILE THE PHONE IS REBOOTING!
A
uto provisioning
1. Open the phone's web interface > Advanced Settings page > Update tab.
2. In the Update area, configure the settings.
For more information, see the ET605 Administrator and Provisioning Manual.
3. Click on Apply. If you have the changed the setting URL and/or the PnP configuration, a reboot is required
before they will take effect.
.
81

Software Update