VTech VSP735 Administrator And Provisioning Manual page 23

VLAN ID
WAN VLan:
WAN port:
PC VLan:
PC port:
Cancel
3. Press  and enter the WAN port number. Use the dial pad and the
key to enter characters. The valid range is 0 to 4095.
4. Press  and then press  or  to enable or disable the PC port VLan.
5. Press  and enter the PC port number. Use the dial pad and the
to enter characters. The valid range is 0 to 4095.
6. Press Save.
To set other settings (DNS and NTP):
1. From the Network setting menu, press  or  to highlight Others, and then
press SELECT.
If DHCP is disabled, the Others menu appears. If DHCP is enabled, an error
message appears briefly before returning you to the Network setting menu.
Others
DNS 1:
DNS 2:
SNTP:
Cancel Backspc
2. Enter the IP address for the primary DNS server. Use the dial pad and the
Add dot soft key to enter characters. Press  or  to advance to the next
character.
3. Press  and enter the IP address for the secondary DNS server. The deskset uses
this server if the primary server does not respond.
4. Press  and enter the IP address for the NTP server. If the deskset does not use
an NTP server, you must manually enter the time and date settings.
5. Press Save.
Disabled
0
Disabled
0
Save
0.0.0.0
0.0.0.0
us.pool.ntp.org
Add dot Save
23
VSP735 Administrator and Provisioning Manual
Backspc soft
Backspc soft key
Using the Phone Menu