VTech VSP735 Administrator And Provisioning Manual page 112

Setting:
network.nat.public_rtp_port_start
Description: Sets the public RTP port range start.
Values: 1–65535
Setting:
network.nat.public_rtp_port_end
Description: Sets the public RTP port range end.
Values: 1–65535
Setting:
network.ip.dhcp_enable
Description: Indicates whether DHCP is enabled.
Values: 0 (disabled), 1 (enabled)
Setting:
network.ip.static_ip_addr
Description: Sets a static IP address for the network.
Values: Text string (IPv4)
Setting:
network.ip.subnet_mask
Description: Sets the subnet mask for the network.
Values: Text string (IPv4)
Setting:
network.ip.gateway_addr
Description: Sets the Gateway IP address.
Values: Text string (IPv4)
VSP735 Administrator and Provisioning Manual
Default:
Default:
Default:
Default:
Default:
Default:
112 Appendix A: Configuration File Settings
18000
19000
1
Blank
Blank
Blank