Xerox WorkCentre6655 User Manual page 216

Troubleshooting
Symptom
White lines or streaks running
through one color only
White line or lines running
through all colors
Slanted printing
Incomplete fusing
216 Xerox WorkCentre
®
User Guide
Cause
Something is blocking the lens for
the affected color.
The toner cartridges are not
Xerox ® toner cartridges.
The toner was stored in a high
temperature area.
Paper or debris is dragging
against the bottom of the
transfer belt unit.
The paper guides are not set
correctly.
Toner appears to be missing from
the print or is easy to rub off.
6655 Color Multifunction Printer
®
Solution
Clean the lens for the affected color.
Replace the toner cartridges with
genuine Xerox ® toner cartridges. For
details, see Consumables
Replace the toner cartridge.
• Remove any paper or debris from
the paper path.
• Replace the transfer belt unit.
• For assistance, go to the Xerox
Support website at
www.xerox.com/office/WC6655sup
port.
Reset the paper tray guides. For details,
see Loading Paper on page 56.
• Verify that the paper you are using
is the correct type for the printer
and is loaded properly.
• Verify that the paper loaded in the
tray matches the paper type
selected at the control panel and in
the print driver.
• Set the paper type to one type
heavier.
on page 185.
®