Printing Takes Too Long; Document Prints From Wrong Tray - Xerox WorkCentre6655 User Manual

Troubleshooting
Probable Causes
The printer cable is disconnected.

Printing Takes Too Long

Probable Causes
The printer is set to a slower printing mode.
For example, the printer could be set to print
on Heavyweight paper.
The printer is in Power Saver mode.
The way the printer was installed on the
network could be an issue.
The job is complex.
The print-quality mode in the driver is set to
Enhanced.

Document Prints From Wrong Tray

Probable Causes
Application and print driver have conflicting
tray selections.
194 Xerox WorkCentre
®
User Guide
Solutions
• At the control panel, touch Job Status. If the print job does not
appear check the Ethernet connection between the printer and
the computer.
• At the control panel, touch Job Status. If the print job does not
appear, check the USB connection between the printer and the
computer. Turn off the printer, then turn it on again.
Solutions
It takes more time to print on certain types of special paper. Ensure
that the paper type is set properly in the driver and at the printer
control panel. For details, see
It takes time for printing to start when the printer is coming out of
Power Saver mode.
Determine if a print spooler or a computer sharing the printer is
buffering all print jobs and then spooling them to the printer.
Spooling can slow print speeds. To test the speed of the printer,
print some information pages such as the Office Demo Page. If the
page prints at the rated speed of the printer, you could have a
network or printer installation issue. For additional help, contact the
system administrator.
Wait. No action needed.
Change the print-quality mode in the print driver to Standard.
Solutions
1. Check the tray selected in the print driver.
2. Go to the page setup or printer settings of the application from
which you are printing.
3. Set the paper source to match the tray selected in the print
driver or set the paper source to Automatically Select.
Note:
the paper source to Auto Selection Enabled.
6655 Color Multifunction Printer
®
Print Speed
To have the print driver select the tray, set the tray used as
on page 233.