Table of Contents
Advertisement
Keep Alive This function keeps your PPPoE connection always on even during a period of
no WAN activity. In some situations the PPPoE session cannot be restored immediately
after disconnection because the ISP's system may need time to restore. Check with your ISP
to ascertain how much time is required before the router starts to re-build the PPPoE session
and enter this into the "Redial Period" field.
When you have properly configured the Setup page, click "Apply". Your Router will then
attempt to connect to the Internet. If you experience problems, please refer to the Trouble
Shooting section before contacting NetComm Technical Support.
www.netcomm.com.au
Page 22
Rev.2 - YML630
Cable/DSL Firewall Router
Advertisement
Table of Contents
