Table of Contents
Advertisement
3. Click Next, and then type a name for your policy (for example, "to_VPNRouter").
4. Deselect the Activate the default response rule check box, and then click Next button.
5. Click the Finish button, making sure the Edit check box is checked.
5-2.2 Build 2 Filter Lists: "WinXP
"Cable/DSL Firewall Router
[Filter List 1] WinXP
1. In the to_VPNRouter Properties, deselect the Use Add Wizard check box, and then click
Add button to create a new rule.
2. From the IP Filter List tab, click the Add button.
3. Type an appropriate name "XP
the Use Add Wizard check box, and then click Add button.
www.netcomm.com.au
Page 36
! ! ! ! !
WinXP".
! ! ! ! !
Cable/DSL Firewall Router
! ! ! ! !
Cable/DSL Firewall Router" for the filter list, deselect
!
Cable/DSL Firewall Router" and
Rev.2 - YML630
Cable/DSL Firewall Router
Advertisement
Table of Contents
