Remove the 4 tapping
2
screws fixing the motor.
Pull out the lead-out wire
and remove the motor.
Remove the 2 tapping
screws fixing the motor
support. Lift to remove
the motor support.
6.Remove electrical box
1
Re move the 2 screws fixing
the cover of electric box. Lift
to remove the cover.
Remove the screws fixing
the electric box subassembly.
Loosen the wire and
disconnect the termina
Lift to remove the electric
box subassembly.
7.Remove
isolation sheet
Remove the 3 screws fixing
1
the isolation sheet and then
remove the isolation sheet.
Fan motor fixing frame
Fan motor
Electrical box
Isolation sheet
M4×16
DC fan motor
The partition plate is fixed to
the bottom frame with a hook.