3.Remove grille and front panel
1
Loosen one screw
and remove the
discharge grille.
2
Loosen the 5 screws of
the front panel.
4.Remove right side plate
1
Remove the 5 screws from
the edge between right-side
board and condenser and
from valve. Lift to remove the
right side plate.
5.Remove fan motor and axial flow fan
1
Remove the screws of the fan
by wrench and then remove
the axial flow fan and fan
motor.
Grille
Fan motor
.
Axial flow fan
Lift the front panel and
remove it while pushing
the right side panel inwards.
Front panel
Right side plate
The screw has reverse
winding.
Remove the propeller
fan.