Vivax ACP-09CH25GECI Service Manual page 63

3.Remove discharge grille and
front panel
Loosen the 1 screws
1
and remove the
discharge grille.
2 Loosen the 5 screws of
the front panel.
4.Remove right side plate
1
Remove the 5 screws from
the edge between right-side
board and condenser and
from valve. Lift to remove the
right side plate.
5.Remove fan motor
Remove the screws of the fan
1
by wrench and then remove
the axial flow fan and fan
motor.
Discharge grille
right
Fan motor
Propeller fan
Front panel
Right side plate
Lift the front panel and
remove it while pushing the right
side panel inwards.
Step Procedure Points
Front panel.
The screw has reverse
winding.
Remove the propeller
fan.