SEAT LOCK AND HELMET
HOLDERS
Front Seat
To remove the front seat.
J
J
2. Raise the front end of the seat and
i
slide it forward.
To reinstall the seat, slide the seat
hooks into the seat hook retainers on
the frame and tighten the bolts se-
curely.
A WARNING
Failure to install the seat properly
could allow the seat to move and
cause loss of rider control.
Fasten the seat securely in its
proper position.
24
descargado de www.IMPERATOR.tk - VIRTUAL MOTORCYCLE CLUB
Rear Seat
The seat lock is located at the left side
of the seat tail cover. To remove the
rear seat, insert the ignition key into
the lock and turn it clockwise.
Raise the rear end of the seat and
slide it backward.
To reinstall the seat, slide the seat
hooks into the seat hook retainers and
push down firmly until the seat snaps
into the locked position.
25
A WARNING
Failure to install the seat properly
could allow the seat to move and
cause loss of rider control.
Latch the seat securely in its proper
position.
Helmet Holders
There are helmet holders under the
rear seat. To use them, remove the
seat, hook your helmet to the helmet
holder and refit the seat.
A WARNING
Riding with a helmet fastened to the
helmet holder can interfere with
rider control.
Never carry a helmet fastened to
the helmet holder. Fix the helmet
securely atop the seat if you must
carry it.