ATX connector
•
To disconnect an ATX connector, push on the lip as shown in the image.
Image 2-6
Lamp power connector
•
These connectors are used to connect the Lamp drivers to the Power box.
•
To disconnect, push on both lips as shown in the image.
Image 2-7
2.4
Removing the cable basket
Necessary tools
No tools.
How to remove the cable basket?
1. Slightly push downwards the middle top of the cable basket to unlock the upper part.
2. Pull the cable basket out of it bottom lock.
R59770097 ID H250 / H500 15/05/2007
2. General information
11