Image 7-30
Fixing screw of optical frame (next to power box)
6. Remove the light pipe fan connector (J31 on the small fan connector board on the bottom of the projector)
Image 7-31
Connector of the light pipe fan (between lamp and power box)
7. Remove connector J38 on the color wheel connection board
Image 7-32
Connector J38 on the color wheel connection board
8. Take out the optical frame by lifting it a bit en sliding it out
9. Remove the IR/UV filter — See"The UV/IR filter", page 69
10.Unscrew the four screws and remove the condenser lens behind the IR/UV filter
R59770097 ID H250 / H500 15/05/2007
7. Mechanical spares and servicing procedures
95