Barco iD H250 Service Manual page 82

Hide thumbs Also See for iD H250:

Table of Contents

6. Optical spares and servicing procedures

Image 6-26

5. Mount the lamp cover and the lamp

Caution:

If you do not mount the lamp cover before starting the projector, the lamps can explode!

6. Select a full white pattern to be projected

7. Turn the adjustment screw until the light beam is aligned on the DMD. This screw can be reached through a whole in the lamp

cover

Image 6-27

Whole in the lamp cover to reach the adjustment screw of the lightrod

R59770097 ID H250 / H500 15/05/2007

Table of Contents

Id h500