Composite Video (Good) - Dynex DX-50D510NA15 User Manual

20
DX-50D510NA15

Composite video (good)

On your TV
AV
(composite
video) cable
connector
AV
(composite
video) jack
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an AV cable (not provided) to the VIDEO/Y jack and AUDIO L and R jacks on the back of your TV and to the AV
OUT jacks on the DVD or Blu-ray player.
3 Plug your TV's power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 Press INPUT to open the INPUT SOURCE list.
5 Press or
Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the
green VIDEO/Y jack.
DVD or Blu-ray player
Audio cable
(composite video)
connectors
Audio jacks
Notes
• The VIDEO/Y, P
B
component device) share the AUDIO L and R jacks with the
VIDEO/Y jack (used to connect a composite device).
• When you connect the audio using the AUDIO L and R jacks,
the audio output is analog.
to select COMP/AV, then press ENTER.
AV cable
Back of TV
, and P video jacks (used to connect a
R
www.dynexproducts.com
Dynex 50" LED TV