26
DX-50D510NA15
VGA (good)
On your TV
VGA cable
connector
VGA jack
1 Make sure that your TV's power cord is unplugged and the computer is turned off.
2 Connect a VGA cable (not provided) to the VGA jack on the back of your TV and to the VGA jack on the computer.
3 Connect an audio cable (not provided) to the PC/DVI AUDIO IN jack on the back of your TV and to the AUDIO OUT
(headphone) jack on the computer.
4 Plug your TV's power cord into a power outlet, then turn on your TV and the computer.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
or
7 Adjust the display properties on the computer, if necessary.
Audio cable
connector
PC/DVI
AUDIO IN
jack
to select VGA, then press ENTER.
Back of TV
www.dynexproducts.com
Dynex 50" LED TV
Audio cable
VGA cable