Dynex 50" LED TV
Component video (better)
On your TV
Component
Audio cable
video cable
connectors
connectors
Component
Analog
video jacks
audio jacks
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect a component video cable (not provided) to the VIDEO/Y, P
COMPONENT OUT jacks on the component video device.
3 Connect an audio cable (not provided) to the AUDIO L and R jacks on the back of your TV and to the L/R AUDIO OUT
jacks on the DVD or Blu-ray player.
4 Plug your TV's power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
or
to select COMP/AV, then press ENTER.
Note
Cables are often color-coded to match color-coded jacks.
DVD or Blu-ray player
Audio
cable
Notes
• The VIDEO/Y, P
, and P
B
R
component device) share the AUDIO L and R jacks with the
VIDEO/Y jack (used to connect a composite device).
• When you connect the audio using the AUDIO L and R jacks,
the audio output is analog.
www.dynexproducts.com
Component video
cable
Back of TV
, and P
jacks on the back of your TV and to the
B
R
video jacks (used to connect a
19
DX-50D510NA15