Av (Composite Video) (Good) - Dynex DX-16E220NA16 User Manual

Dynex 16" LED TV

AV (composite video) (good)

On your TV
AV Audio cable
(composite connectors
video) cable
connector
AV Analog
(composite audio jacks
video) jack
1 Make sure that your TV's AC power adapter is unplugged and all connected devices are turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an AV cable (not provided) to the VIDEO/Y jack and AUDIO L and R jacks on the back of your TV and to the
composite video and audio out jacks on the cable or satellite box.
4 Plug your TV's AC power adapter into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to highlight Comp/AV, then press ENTER.
Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the
green VIDEO/Y jack.
Important
• The VIDEO/Y, P , and P
B R
component device) share AUDIO L and R jacks with the
VIDEO/Y jack (used to connect a composite device). You can
only connect one component video or AV device at a time. We
suggest upgrading to HDMI if your cable or satellite box
supports it.
• When you connect the audio using the AUDIO L and R jacks,
the audio output is analog.
www.dynexproducts.com
AV cable
(composite video cable)
Back of TV
video jacks (used to connect a
DX-16E220NA16
Cable or
satellite box
17