Playing Tv Audio Only; Setting Parental Controls; Setting Or Changing The Password - Dynex DX-50D510NA15 User Manual

Dynex 50" LED TV
• MTS/SAP—(Analog channels only) Selects the
audio mode. You can select:
• Mono—Select this option if there is noise or
static on weak stereo broadcasts.
• Stereo—Select this option for programs
broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
Note
You can also press MTS/SAP one or more
times to select the audio mode.
• Reset Audio Settings—Reset all audio settings to
factory defaults.
4 Press MENU to return to the previous menu, or press
EXIT to close the menu.

Playing TV audio only

You can turn off the picture on your TV and listen to the
program audio only.
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Audio, then press
ENTER. The Channels menu opens.
3 Press or to highlight Audio Only, then press
or to select On.
4 Press MENU to return to the previous menu, or press
EXIT to close the menu.
Notes
• The picture turns off in about five
seconds.
• Audio Only works only when the
input source is TV, and your TV is
receiving a broadcast signal.
• To exit audio only mode, press any
button. When you exit audio only
mode, the Audio Only option is
automatically reset to Off.

Setting parental controls

Parental controls let you prevent your children from
watching inappropriate material on TV. When set,
parental controls read the rating of the program (with
some exceptions, such as news and sports) and deny
access to programs that exceed the ratings level you
select. To watch programs that exceed the selected
rating, you must enter the password.

Setting or changing the password

1 Press MENU. The on-screen menu opens.
2 Press
Settings menu opens with Parental Controls
highlighted.
or
3 Press ENTER. The Enter Password screen opens.
www.dynexproducts.com
DX-50D510NA15
or to highlight Settings, then press . The
45