Connecting A Cable Or Satellite Box; Hdmi (Best) - Dynex DX-50D510NA15 User Manual

12
DX-50D510NA15

Connecting a cable or satellite box

Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see

HDMI (best)

On your TV
HDMI cable
connector
HDMI jack
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT jack on the
cable or satellite box.
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or
Cable or
satellite box
to highlight HDMI1 or HDMI2, then press ENTER.
Note
An HDMI cable carries both audio and video. You do not need to
use any audio cables.
"What connection should I
HDMI cable
www.dynexproducts.com
Dynex 50" LED TV
use?" on page 11.
Side of TV