Component Video (Better) - Dynex DX-50D510NA15 User Manual

14
DX-50D510NA15

Component video (better)

On your TV
Component
video cable
connectors
Component
video jacks audio jacks
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a component video cable (not provided) to the VIDEO/Y, P
component video out jacks on the cable or satellite box.
4 Connect an audio cable (not provided) to the AUDIO L and R jacks on the back of your TV and to the audio out jacks on
the cable or satellite TV box.
5 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
6 Press INPUT to open the INPUT SOURCE list.
7 Press or
Note
Cables are often color-coded to match color-coded jacks.
Cable or
satellite box
Audio cable
connector
Audio
cable
Analog
Notes
• The VIDEO/Y, P
B
component device) share the AUDIO L and R jacks with the
VIDEO/Y jack (used to connect an AV device).
• When you connect the audio using the AUDIO L and R jacks,
the audio output is analog.
to highlight Comp/AV, then press ENTER.
Component
video cable
, and P
B
, and P video jacks (used to connect a
R
www.dynexproducts.com
Back of TV
video jacks on the back of your TV and the
R
Dynex 50" LED TV