Selecting A Channel; Adjusting The Volume; Viewing Channel Information - Dynex DX-50D510NA15 User Manual

Dynex 50" LED TV

Selecting a channel

• Press CH+ or CH– to go to the next or previous
channel on the memorized channel list.
• Press the number buttons to enter the analog or main
digital channel number you want, then wait for the
channel to change or press ENTER to immediately
change the channel.
• To select a digital sub-channel, press the number
buttons to select the main digital channel, press ,
then press the number button for the sub-channel.
Wait for the channel to change, or press ENTER to
immediately change the channel. For example, to tune
to channel 5.1, press 5, , then 1.
Note
Button presses must be within three
seconds of each other.
• Press (return) to go to the last viewed channel.
• Press FAV to open the favorite channel list, press
to highlight a channel, then press ENTER.
Note
If a list has more than one page, press
to scroll through the pages.

Adjusting the volume

• Press VOL+ or VOL– to increase or decrease the
volume.
• Press
again to turn the sound back on.

Viewing channel information

• Press INFO* to view an information banner. The
information banner shows the current program
information such as channel number, video input
source, and resolution.
• Digital channel information—Displays the channel
number, channel label, broadcast program name,
TV rating, signal type, audio information,
resolution, CC mode, and current time.
• Analog channel information—Displays channel
number, channel label (if present), signal type, and
audio information.
or
or
www.dynexproducts.com
DX-50D510NA15
(mute) to turn off the sound. Press
37
(mute)