Av (Composite Video) (Good) - Dynex DX-40D510NA15 User Manual

16
DX-40D510NA15

AV (composite video) (good)

On your TV
AV
(composite
video)
cable
connector
AV
(composite
video) jack
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an AV cable (not provided) to the VIDEO/Y jack and AUDIO L and R jacks on the back of your TV and to the
composite video and audio out jacks on the cable or satellite box.
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or
Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the
green VIDEO/Y jack.
Audio cable
connectors
Analog
audio jacks
Notes
• The VIDEO/Y, P
B
component device) share the AUDIO L and R jacks with the
VIDEO/Y jack (used to connect a composite device).
• When you connect the audio using the AUDIO L and R jacks,
the audio output is analog.
to highlight Comp/AV, then press ENTER.
AV cable (composite video)
Back of TV
, and P video jacks (used to connect a
R
www.dynexproducts.com
Dynex 40" LED TV
Cable or
satellite box