To Display The All Form Menu - Casio KL-8100 User Manual

All Text Operations
The procedures in this section control the following parameters for all of the text on the display.
• Mirror printing (mirror, normal)
• Proportional character spacing (on, off)
• Smoothing (on, off)
• Block space (none, narrow, wide)
• Feed (long, short, manual)
• Tape length (auto, fixed)
• Block alignment (left, center, right, uniform spacing)
Use the BLOCK FORM menu to perform block operations.

To display the ALL FORM menu

1. While there is text on the display, press FORM.
2. Use u and i to move the highlighting to "ALL FORM" and then press SET.
• Use u and i to move the highlighting between menu items.
• The ALL FORM menu has three pages. Press SET while the first page is displayed to change to the second page. Press SET while the second page is displayed
to change to the third page. Pressing SET while the third page is displayed registers any settings with the menu and returns to the text input screen.
• Use t and y to change between settings of the currently selected (highlighted) item.
• The following explanations describe each of the ALL FORM menu items in detail.
MIRROR/NORMAL
MIRROR
NORMAL
PROPORTIONAL
ON
OFF
SMOOTHING
ON
OFF
BLOCK SPACE
NONE WIDE
NARROW
FEED
You can also one of two different feed settings that provides either long or short side spaces ("Fundamentals of Label Layout" page E-16). You can also specify
manual feed.
LONG
This setting causes the tape to feed 16mm at the beginning and end of each printing.
SHORT
This setting causes the tape to feed 3mm at the beginning and end of each printing.