4.11.2 Parameter List Print - Brother HL-4200CN Service Manual

4.11.2 Parameter list print

Function: Outputting a list of setting and displaying parameters held by IOT in NVM
Operation procedure:
1. Enter the Diag. (C/E) mode.
2. Select [CE Maintenance Parameter] with the
3. Press the Form Feed/Set button to advance to setting/display parameter selection in
[CE Maintenance Parameter].
4. Select [Parameter Print] with the
5. Press the Form Feed/Set button to determine the selection.
6. Press the Form Feed/Set button again to print the parameters.
and
HL-4200CN MCU Parameter List
Registration Adjust Slow Scan Paper from Black
Registration Adjust Slow Scan, 600dpi, Magenta from Black : 6
Registration Adjust Slow Scan, 1200dpi, Magenta from Black : 11
Registration Adjust Fast Scan Magenta from Black
Registration Adjust Fast Scan, Paper from Black : MP Tray
Life Counters Yellow Toner Dispense Time
Magenta Toner Dispense Time
Cyan Toner Dispense Time
Black Toner Dispense Time
Transfer Roll Cartridge1 Sheets
Printer Sheets
Printer Head Sheets
Printer Head Time
Printer Head Yellow Dispense
Printer Head Magenta Dispense
Printer Head Cyan Dispense
Printer Head Black Dispense
V-56
and buttons.
buttons.
Serial No. 000000
Yellow from Black
Cyan from Black
Yellow from Black
Cyan from Black
Yellow from Black
Cyan from Black
Paper from Black : Tray1
Paper from Black : Tray2
Paper from Black : Tray3
Paper from Black : Duplex
: 0
: 4
: 1
: 9
: 1
: 1
: 3
: 3
: 0
: 0
: 0
: 0
: 0
: 645
: 700
: 802
: 648
: 373
: 373
: 369
: 8183
: 645
: 782
: 883
: 730