Sensor Photo: Dup; Actuator Msi - Brother HL-4200CN Service Manual

2.3.5

Sensor photo: DUP

1) Remove the sensor photo: DUP cable.
2) Release the 3 hooks securing the sensor photo: DUP to the chute ASSY out.
3) Remove the sensor photo: DUP from the chute ASSY out.
2.3.6

Actuator MSI

1) Pushing down the plate bottom MSI on the chute ASSY out push the actuator MSI
inward.
2) Slide the actuator MSI leftward and remove the shaft from the right side of the
actuator MSI.
3) Remove the actuator MSI together with the spring sensor MSI.
4) Remove the spring sensor MSI from the actuator MSI.
Sensor photo: DUP
Fig.4-43
Sensor photo: MSI
Actuator MSI
Fig.4-44
- IV-23 -
Spring sensor MSI