Error Code Fip - Brother HL-4200CN Service Manual

LCD Display
010-350
Turn OFF the Power.
010-351
Turn OFF the Power.
010-354
Turn OFF the Power.
016-300
Turn OFF the Power.
016-301
Turn OFF the Power.
016-302
Turn OFF the Power.
016-310
Turn OFF the Power.
016-311
Turn OFF the Power.
016-312
Turn OFF the Power.
< Name of Fail>
Contents of Trouble
<IOT Fuser Failure>
1. Temperature exceeding 235 C detected consecutively 4 times.
2. Temperature below 235 C detected consecutively 4 times.
3. Resistance value of STS sensor over 2437K detected consecutively 4
times.
4. Target temperature is not reached more than 60 seconds after the fuser
lamp lighted up.
5. After the target temperature is reached, the fuser lamp was kept on for
more than specified time.
6. Value of the STS sensor does not change after the lamp lights up.
7. Temperature exceeding 230 C detected during printing process
consecutively twice.
<IOT Fuser Life Over>
Fuser ASSY life expired.
<IOT Environment Sensor Error>
1. The temperature over +100 C or below –20 C was detected.
2. The humidity over 100% was detected.
<ESS Data Cache Error>
CPU data cache error
<ESS Instruction Cache Error>
CPU instruction cache error
<ESS Illegal Exception>
CPU illegal exception
<ESS Font ROM Error (Main)>
Internal font ROM checksum error
<ESS FontROM Error(Opt)>
Option Font ROM checksum error
<ESS HD Fail >
Detected by a HDD error.
V-4
Action Reference
Power off/on 2.9.1
See fuser failure FIP 2.9.6
Power off/on 2.3.1
See fuser life over FIP 2.3.3
Power off/on 2.8.7
See environment sensor 2.8.8
error FIP
Power off/on
2.3.1
2.3.3
Power off/on
2.3.1
2.3.3
Power off/on
2.3.1
2.3.3
Power off/on
2.3.1
2.3.3
Power off/on
2.3.1
2.3.3
Power off/on
2.3.1
2.3.3
BSD