P 370/470 RF Scanner Product Reference Guide
Stop Bit Select
The stop bit(s) at the end of each transmitted character marks the end of transmission of one
character and prepares the receiving device for the next character in the serial data stream.
The number of stop bits (one or two) selected depends on the number the receiving terminal
is programmed to accommodate. Set the number of stop bits to match host device
requirements.
ASCII Format
This parameter allows the cradle to interface with devices requiring a 7-bit or 8-bit ASCII
protocol.
5-94
1 STOP BIT
2 STOP BITS
7-BIT
8-BIT