Symbol P 370 RF Reference Manual page 45

Press the <ENTER> key to confirm the choice (Yes) or the <BK> key to cancel the choice
(No). If you are to enter the MCLNet Host Mode, a confirmation screen displays warning
that data may be lost. Press the <ENTER> key to continue or the <BK> key to cancel.
Set Default App
Restores the default application described above. The default application overwrites any
downloaded application. (This option may be used to restore functionality to a scanner which
has been loaded with a defective application.) Prior to resetting the default application, the
user is prompted to confirm this operation:
Press the <ENTER> key to confirm the choice (Yes) or the <BK> key to cancel the choice
(No).
Load System Code
Puts the scanner in download mode, and it is ready to receive a new application or an updated
version of the system software from the host computer.
Enable Autoload
Enables the automatic application download feature in the default application. This allows
the user to remove the scanner from the box, pair it with the cradle, place the scanner in the
cradle and automatically download the user's application to the scanner.
In order for this feature to operate properly, the cradle must be connected to a host running
MCL-Link, and the user's host must be configured properly with specific files in specific
locations (See Appendix A). If the user does not set up the host in the required manner, the
scanner reverts to normal charging mode. This feature is enabled by default, but may be
disabled by use of this System Menu item.
Reset Default App?
EN=Y BK=N
Figure 3-15. Default Application Screen
Download New System?
EN=Y BK=N
Figure 3-16. Load System Code Screen
Operation
3-13