Stop Bit Select; Ascii Format - Symbol LS 4000P Series Product Reference Manual

Stop Bit Select

The stop bit(s) at the end of each transmitted character marks the end of transmission of one
character and prepares the receiving device for the next character in the serial data stream.
The number of stop bits selected (one or two) depends on the number the receiving terminal
is programmed to accommodate. Set the number of stop bits to match host device
requirements.

ASCII Format

This parameter allows the scanner to interface with devices requiring a 7-bit or 8-bit ASCII
protocol.
1 STOP BIT
2 STOP BITS
7-BIT
8-BIT
Parameter Menus
5-91