Stop Bit Select; Ascii Format - Symbol P460 Product Reference Manual

Parameter Menus

Stop Bit Select

The stop bit(s) at the end of each transmitted character marks the end of transmission of
one character and prepares the receiving device for the next character in the serial data
stream. The number of stop bits (one or two) selected depends on the number the receiving
terminal is programmed to accommodate. Set the number of stop bits to match host device
requirements.
*1 STOP BIT
2 STOP BITS

ASCII Format

This parameter allows the cradle to interface with devices requiring a 7-bit or 8-bit ASCII
protocol.
7-BIT
*8-BIT
5-93