Beeper Indications - Symbol P 370 RF Reference Manual

P 370/470 RF Scanner Product Reference Guide

Beeper Indications

Table 4-4 list beep sequence and their meanings for standard beeps programmed into the
scanner. Other applications written for the scanner can have their own beep sequences and
therefore are not listed in this table. See your System Administrator for beep sequences and
their meanings.
Beeper Sequence
Standard Use
Short high tone
4 long low beeps
5 Beeps - low tone
Hi/Hi/Hi/Lo tone
4 Beeps - short Hi
4 Beeps - Lo/Hi/Lo/Hi An RF transmission error has occurred.
Parameter Menu Scanning
Short high tone
Note: Error messages can be costomized in your application.
4-8
Table 4-4. Beeper Indications
Indication
A bar code symbol was decoded (if
decode beeper is enabled).
A host transmission error occurred. Data
was not successfully sent to the host
device. This occurs if a unit is not
properly configured. Check option
settings.
Convert or format error.
RS-232 receive error.
Low battery.
Move closer to the cradle and re-scan the
bar code.
Correct entry scanned or correct menu
sequence performed.
Default Application Display
Message
N/A
Error 00003 during transmit.
Error 00009 during transmit.
Error 00018 during transmit.
Error 00247 during transmit.
Error 00249 during transmit.
Error 00253 during transmit.
Error 00002during transmit.
Error 00008during transmit.
Error 00005 during transmit.
Low Battery
Error 00015 during transmit.
Error 00016 during transmit.
Error 00017 during transmit.
Error 00024 during transmit.
N/A