Stop Bit Select; Data Bits - Symbol LS2208 Product Reference Manual

6 - 12 Symbol LS2208 Product Reference Guide

Stop Bit Select

The stop bit(s) at the end of each transmitted character marks the end of transmission of one character and
prepares the receiving device for the next character in the serial data stream. Select the number of stop bits (one or
two) depending on the number the receiving terminal/host is programmed to accommodate.

Data Bits

This parameter allows the scanner to interface with devices requiring a 7-bit or 8-bit ASCII protocol.
*
1 Stop Bit
2 Stop Bits
7-Bit
*
8-Bit