Call Waiting - Gigaset A510ip User Manual

§OK§
Press the display key.
Internal call divert is only single-stage i.e., if calls for the handset are diverted to a
different handset (e.g., MT1) on which a call divert is also active (e.g., to MT2), this
second call divert is not executed. The calls are signalled on handset MT1.
Please note
u
Any call for the handset that has been diverted is entered in the call lists.
u
If a call to a receive connection that is only assigned to the handset is
diverted to a handset that is not available (e.g., the handset is deactivated),
the call is rejected after a short time.
Activating/deactivating call waiting for external calls
If the function is activated, during an external call you will hear a call waiting tone
to signal that another external caller is trying to get through. If you have CLIP, the
number of the waiting caller or the corresponding directory entry is shown in the
display. The caller will hear the ringing tone.
When call waiting is deactivated, the caller will hear the busy tone if you are already
making a call and you are the only party assigned to this connection.
Activating/deactivating call waiting
Prerequisite for calls via VoIP: Parallel VoIP connections are permitted on your tel-
ephone (default setting; setting can be changed via the Web configurator).
¤
Ç Select Services
§Menu§
r
Select On/Off to activate/deactivate call waiting.
¤
Press the display key
Call waiting is activated/deactivated for all connections to the telephone and all
registered handsets.
To activate/deactivate the function for the fixed line connection, the phone estab-
lishes a connection to the exchange to send the relevant code.
¤
After confirmation from the fixed line, press the end call key a.

Call waiting

Many Telecommunication providers in Australia and New Zealand offer a Call wait-
ing service on your Home Phone Line. Please speak to your service provider to
check if your Home Phone line is activated for this service (charges may apply).
The most common providers instructions for Call waiting are as follows.
Please note
These processes depend on the network provider and are subject to change.
Australia:
Telstra:
To answer an incoming call when you're already on a call, or to switch between calls:
¤
Press the Recall key Q and listen for the dial tone, then press 2.
To hang up on one call and return to the other:
¤
Call Waiting
§Send§
.
Making calls using select services
55