Gigaset A510ip User Manual page 58

Making calls using select services
¤
Press the Recall key Q on your phone and listen for the dial tone, then press 1.
To reject an incoming call when you are already on a call:
¤
Push the Recall key Q on your phone and listen for the dial tone, then press Q
again.
For more information please contact Telstra.
Optus:
You are on the phone and hear the beeps.
To put the first caller on hold and talk to the new caller (the caller on hold will hear
nothing):
¤
Press the Recall key Q on your phone.
To return to the first caller:
¤
Press the Recall key Q and put the new caller on hold. You can alternate
between the calls in this way.
Or
¤
Hang up the first call. The phone will ring again with the second caller. This
means that you will not be able to go back to the first caller.
For more information please contact Optus.
New Zealand:
Telecom NZ:
You are on the phone and hear four beeps.
To talk to the second caller:
¤
Press the Recall key Q on your phone.
To return to the first caller:
Press the Recall key Q again and you will be able to continue your original conver-
sation.
For more information please contact Telecom NZ.
Activating/deactivating call transfer – ECT (Explicit Call Transfer –
VoIP)
If the function is activated, you can connect two externalcallers on a VoIP connec-
tion with each other by pressing the end call key a
that you are making an external call via one of your VoIP connections and start an
external consultation call.
You can activate/deactivate this function via your handset.
¤
§Menu§
Transfer (ECT)
Please note
You can use the Web configurator to change further settings for the call transfer
on a VoIP connection
56
Ç Select Services
Select and press
¢
( page
§OK§
(³ = on).
136).
¢
( page 58). This assumes