Gigaset A510ip User Manual page 137

Access codes – activating dialling plans when connecting
to a PABX
If your phone is connected to a PABX, you may have to enter an access code for
external calls (outside line code, e.g., "0").
Save one access code each for fixed line and VoIP connections and specify sepa-
rately for VoIP and fixed line connections when the phone numbers should be auto-
matically prefixed with the digits.
You can choose between Use always, Do not use and Use for call lists (only when
dialling from the calls list).
These settings are available in the Access Code area on the Web page:
¤
Settings Telephony
Entering the network mailbox, enabling/disabling the network
mailbox
A list of the network mailboxes for all connections on your phone is available on the
Web page:
¤
Settings Telephony
You can enter the phone numbers for the network mailboxes in this list.
You can use this list to activate/deactivate the network mailboxes for all configured
VoIP connections.
Making special settings for VoIP telephony
Activating call divert (call forwarding) for VoIP connections
The settings for call divert are on the Web page:
¤
Settings Telephony
You can divert calls to your VoIP connections and to your Gigaset.net number.
You can divert calls to your VoIP connections to any external number (VoIP, fixed
line or mobile number). Call divert takes place via VoIP.
You can divert calls to your Gigaset.net number within the Gigaset.net, i.e., to
another Gigaset.net number.
For each of your VoIP connections (VoIP accounts), you can determine if and when
calls to the corresponding VoIP number should be diverted to a different VoIP
phone number.
Configuring the phone via the Web configurator
¤
Dialling Plans
¤
Network Mailboxes
¤
Call Divert
135