Gigaset A510ip User Manual page 47

Please note
u
If you use VoIP to make a call to the fixed line, you may also have to dial the
area code for local calls (depending on the provider). You can avoid having
to dial your own area code by entering it in the configuration and activating
the Predial area code for local calls via VoIP option (see Web configurator).
u
If you have activated the Automatic Fallback to Fixed Line option with the
Web configurator and the attempt to connection via VoIP fails, the system
automatically tries to set up the connection via the fixed line.
u
Gigaset.net numbers ending with the suffix #9 are automatically dialled via
the Gigaset.net connection. The calls are free of charge
Selecting a line for each call
Prerequisite: The "Select at each call" option has been assigned to the handset
instead of a send connection.
~ c
Enter the number and press the talk key. The list of all the phone's con-
nections is displayed.
q
Select a line.
§Dial§
Press the display key.
If a dialling plan has been defined for the dialled phone number
then the send connection specified in the dialling plan is used.
Please note
You can cancel the dialling process with the end call key a.
u
u
You are shown the duration of the call while the call is in progress.
u
Dialling with the directory
you from repeatedly keying in phone numbers.
Using the connection list on the display key
Prerequisite: You have assigned the list with all configured connections to a display
¢
key ( page 102).
q Press the display key and select the connection.
§Sel.Cn.§
c/
§Dial§
Press the talk key or display key.
~
Enter a number. The number is dialled approximately 3.5 seconds after
the last digit is entered.
Any dialling plan that has been defined for the dialled phone number is ignored.
Exception: If a block is set in the dialling plan, this takes effect for VoIP connections
(but not fixed line connections).
(page 64) or call and redial list
Making calls
¢
( page 50).
¢
( page 133),
(page 60) saves
45