Troubleshooting - Icom IP100H Instruction Manual

7
FOR YOUR REFERENCE

Troubleshooting

The following chart is designed to help you correct
problems which are not equipment malfunctions.
PROBLEM
No power comes ON.
No sound comes from the
speaker.
No reply is received
"Key lock" is displayed
when a key is pushed
Cannot charge the battery
pack completely
The charging indicator
blinks orange, or alternately
blinks orange and green
The " " icon blinks, or
"Connecting..." is displayed
( standby screen won't be
displayed)
POSSIBLE CAUSE
• The battery charge is exhausted.
• Loose connection of the battery pack
(case).
• Volume level is too low.
• Too far from an access point.
• The " " icon blinks.
• The operator is away from the terminal, or
the terminal is turned OFF.
• The Key Lock function is turned ON.
• The communication terminal power is
ON.
• The battery pack is not properly inserted.
• Charging the battery pack outside of the
chargeable temperature range.
• Loose connection of charging terminals.
• The communication terminal power is
ON.
• SSID Broadcast function is OFF in an ac-
cess point (when 5 GHz band is used).
• Too far from an access point.
• Access point power is OFF.
If you are unable to locate the cause of a problem, or
solve it through the use of this chart, contact your near-
est Icom Dealer or Service Center.
• Charge the battery pack, or replace the
batteries.
• Clean battery pack (case) terminals.
• Rotate [PWR/VOL] to adjust to a desired
level.
• Move your location, then try again.
• Wait until the operator is back, or ask sys-
tem manager about the status.
• Hold down [CLR•
turn the Key Lock function OFF.
• Turn OFF the power.
• Insert the battery pack properly.
• Charge the battery pack in the charge-
able temperature range:
BC-202: 0°C to 40°C (+32°F to +104°F)
BC-211: 10°C to 40°C (+50°F to +104°F)
• Clean the charging terminals.
• Turn OFF the power.
• Ask your system manager about the ac-
cess point settings.
• Move your location, then try again.
• Turn ON the access point power.
7-2
SOLUTION
] for 1 second to
REF.
pp. 2-4
2-6
–
p. 3-2
–
–
p. 3-3
p. 2-4
p. 2-4
p. 2-3
–
p. 2-4
–
–
–