Status Call; Erasing All Log Items - Icom IP100H Instruction Manual

4
CALLING OPERATION

Status Call

[PTT]

Erasing all log items

SET
LOG – – –
Push [J]/[K]
SET
LOG CLR
4-8
Push [FUNC] one or more times to select "Status."
q
Push [ J] or [K] one or more times to select a desired
w
status.
• The selected status may scroll, depending on the mes-
sage length.
Push [PTT] to call.
e
• When your status call is successful, "Successful" may
be displayed and beeps may sound, depending on your
IP1000C's settings.
For your information
A transmitted your status can only be confirmed with
your IP1000C system controller or IP100FS remote
communicator. Not for an individual IP100H communi-
cation terminal.
All items in the Tx log, Rx log, Tx MSG log, Rx MSG log,
Tx TEL log and Rx TEL log, can be manually erased,
if desired.
Turn OFF the communication terminal if it is ON.
q
While holding down [FUNC], turn ON the power.
w
• When "SET" is displayed, release [FUNC].
J] or [K] one or more times to select "CLR."
Push [
e
Push [ ].
r
• "Deleting..." is displayed, then the IP100H automatically
reboots.