Pocket Beep Function; P-Bell Function; About The [Option] Switch - Icom IP100H Instruction Manual

5
OTHER FUNCTIONS

Pocket beep function

1/23 12:34
All
Standby screen

P-Bell function

Displays
1/23 12:34
All
Standby screen

About the [Option] switch

[Option]
Blinks
1/23 12:34
All
When a call is received
The Pocket beep function sounds beeps and blinks the
" " icon to let you know a call is being received.
• This function is set by your IP1000C system controller.
The P-Bell function sounds beeps to let you know a call
is being received.
However, you cannot listen to the call until you answer
it.
• Push [PTT] to answer the call, then listen to the caller.
• The " " icon is displayed when the P-Bell function is
used.
• This function is set by your IP1000C system controller.
One of the following functions may be assigned to the
[Option] switch by your IP1000C system controller.
• Message select:
• One touch call select: Selects often used call types
• Clear down:
Ask your system manager which function is assigned.
5-2
Selects often used messages.
with an address.
( either All, Group, Individual or
Telephone)
Hangs up a telephone call.