Kaco Powador 3200 Operating Instructions Manual page 20

M o unti ng th e Inve rt e r
Authorised electrician
NOTE
Power reduction due to heat accumulation.
If the recommended minimum clearances are not observed, the inverter may go into power
regulation mode due to insuffi cient ventilation and the resulting heat buildup.
› Maintain minimum clearances.
› Provide for suffi cient heat dissipation.
Figure 9: Instructions for wall mounting
CAUTION
Use suitable mounting parts.
› Use only the supplied mounting parts.
› Mount the inverter upright on a vertical wall only.
Page 20
1386
Figure 10: Drill stencil for wall mounting with minimum clearances
(in mm)
405
565
328
1120
Operating Instructions Powador 3200-6600_EN