Kaco blueplanet 3.0 NX1 M2 Manual
  1. Manuals
  2. Brands
  3. Kaco Manuals
  4. Inverter
  5. blueplanet 3.0 NX1 M2
  6. Manual

Kaco blueplanet 3.0 NX1 M2 Manual

Hide thumbs Also See for blueplanet 3.0 NX1 M2:
Table of Contents

Advertisement

Quick Links

Download this manual
Application Note – installation and use of the APP
 English translation of German original
Authorised electrician
Important safety instructions
Android APP
T
his is additional information on the product and must be observed. It is available online via our homepage and corresponds to the
current software version. The copyright for this application note lies solely with KACO new energy GmbH.
iOS APP
Installation video
KACO blueplanet 3.0 NX1 M2
KACO blueplanet 3.7 NX1 M2
KACO blueplanet 4.0 NX1 M2
KACO blueplanet 5.0 NX1 M2
3.0-5.0 NX1
Start-up via APP

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the blueplanet 3.0 NX1 M2 and is the answer not in the manual?

Questions and answers

Related Manuals for Kaco blueplanet 3.0 NX1 M2

Summary of Contents for Kaco blueplanet 3.0 NX1 M2

  • Page 1 3.0-5.0 NX1 his is additional information on the product and must be observed. It is available online via our homepage and corresponds to the current software version. The copyright for this application note lies solely with KACO new energy GmbH.

  • Page 2: Table Of Contents

    Table of contents Initial Commissioning ........1 Configuring parameters ........ 15 System requirement ............1 Authorisation to change parameters ....15 System overview ............... 1 Enabling functions ............16 Connectivity................ 2 Connection Conditions ..........17 Authorisation ..............2 Trip Voltage Settings ............ 17 Integrating the Inverter into the customer WLAN Trip Frequency Settings ..........

  • Page 3: Initial Commissioning

    (see chapter 1.5) device and optional monitoring (see data logger (optional) (see chapter 1.5 chapter 1.5 and 2.4) and 2.4) Page 1 KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2...

  • Page 4: Connectivity

    To use the monitoring and control functions (Monitoring Portal "blueplanet web"), there must be a connection to the Internet via the customer WLAN. KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2 Page 2...

  • Page 5: Integrating The Inverter Into The Customer Wlan Network

    Fig. 9. Access with mobile device to the Entering access data for the communication device customer WLAN network Page 3 KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2...
  • Page 6 WLAN network. Fig. 12. Status on successful connection Fig. 13. connection established - blue LED flashes. KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2 Page 4...

  • Page 7: Connecting The Inverter To A Mobile Device Via Hotspot

    » The communication device is connected corresponding manual. to its mobile device. Fig. 16. Select available communication Fig. 17. connection established device Page 5 KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2...

  • Page 8: Menu Of The Communication Device

    3. View feed-in values of the selected unit via <instantaneous values>. >> see chapter 1.11 on page 8 Fig. 20. Set time zone KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2 Page 6...

  • Page 9: Select Country & Grid Code

    Check or change country and Fig. 25. select country & grid code - grid code observe normative requirement! Page 7 KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2...

  • Page 10: Viewing The Instantaneous Values

    » Modbus address configured. entry <Confirm>. Fig. 28. Select Modbus address Fig. 29. Set mode address KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2 Page 8...

  • Page 11: Operation Mode

    2. Confirm selection device set. Fig. 32. Fig. 33. Selecting the operating mode of Select mode the communication device Page 9 KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2...

  • Page 12: Connecting The Mobile Device To The Router

    Fig. 36. Registering via KACO blueplanet web public KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2 Page 10...

  • Page 13: Dynamic Feed-In

    Select feed and meter settings Select smart meter model and set max. feed-in power Fig. 39. Block diagram for dynamic feed-in Page 11 KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2...

  • Page 14: Additional Functions

    6. Assign DNS server address. Fig. 42. Viewing details of the WLAN Fig. 43. Set static IP address connection KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2 Page 12...

  • Page 15: Reset Faulty Connection

    » Network changed. the label as a password. Fig. 47. Select Network Configuration Fig. 48. Change the network Page 13 KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2...

  • Page 16: Apn Setting

    » Access point successfully set up. 2. Transfer entries with <Confirm>. Fig. 49. Fig. 50. Setting the access point Set mobile access KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2 Page 14...

  • Page 17: Configuring Parameters

    Fig. 51. Fig. 52. Fig. 53. Warning only at the first accidental abort Select parameter settings authorisation required attempt. Page 15 KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2...

  • Page 18: Enabling Functions

    3. Transfer the selection with <OK>. The unit then restarts with the desired range of functions Fig. 54. Select inverter Fig. 55. Activate/Deactivate Functions Fig. 56. Switching the required functions KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2 Page 16...

  • Page 19: Connection Conditions

    » Voltage protection defined. Fig. 59. Select Trip Voltage Settings Fig. 60. Define voltage range and switch-off times Page 17 KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2...

  • Page 20: Trip Frequency Settings

    » Reconnection time defined. Fig. 63. Select connection time settings Fig. 64. Define Start connection Time & Reconnection time KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2 Page 18...

  • Page 21: Other Protection Settings

    Open menu <Setting for>. Fig. 67. Select active Power settins Fig. 68. Define max. active power & gradients Page 19 KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2...

  • Page 22: P(F) Settings

    Fig. 72. with hysteresis KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2 Page 20...

  • Page 23: P(U) Settings

    Ureset. Fig. 76. With Hysteresis Page 21 KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2...

  • Page 24: Reactive Power Settings

    Under-excited reactive power, also known as inductive reactive power or lagging power factor. Fig. 80. Load reference arrow system KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2 Page 22...

  • Page 25: Settings For "Cos-Phi Constant

    4. <Confirm> all settings. » <Q constant> defined. Fig. 83. Fig. 84. Select Q Constant Settings Set reactive Power Setpoint Page 23 KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2...

  • Page 26: Settings For "Cos-Phi(P)

    The voltage thresholds are normally referred to as the “Lock-In” and the “Lock-Out” voltage. Fig. 87. Cos-phi(P) curve KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2 Page 24...

  • Page 27: Settings For "Q(U)

    “Lock-In” and the “Lock-Out” active power. Fig. 90. Q(U) curve and non-hysteresis Fig. 91. Q(U) curve and hysteresis Page 25 KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2...

  • Page 28: Inverter Parameter Report

    » After successful update, continue with the inverter firmware update. Fig. 94. Fig. 95. Select firmware update Update the communication device KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2 Page 26...

  • Page 29: Update Of The Inverter

    NOTE When the communication device is plugged in, no communication via RS485 is possible during firmware update. Page 27 KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2...

  • Page 30: Information To Dynamic Feed-In

    Based on the following graph, it can now be seen that a significantly lower power loss of the PV system can be expected due to the transmitted self-consumption values. KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2 Page 28...
  • Page 31 Zero Feed-in diagramm Legend Available PV power (red area) External supply (yellow area) Energy demand of single-family house (green area) Page 29 KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2...
  • Page 32 However, this function can only be implemented by the data logger, as it has an S0 output and could thus switch on additional consumers via a relay circuit. KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2 Page 30...

  • Page 33: Troubleshooting

    If the measured voltage is abnormal, please check the isolator switch and the cable (wiring error, loose connection, short-circuit, insulation etc.). Page 31 KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2...
  • Page 34 If the measured voltage is normal, there is an error in the inverter. Please contact customer service to replace the inverter. If the measured voltage exceeds the safety requirements, please check the system voltage. KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2 Page 32...
  • Page 35 Make sure that the grounding cable is not loose, that it is firmly connected, and that the connection area is adequate. If the error is not remedied, please contact customer service to replace the inverter. Page 33 KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2...
  • Page 36 Werner-von-Siemens-Allee 1 · 74172 Neckarsulm · Germany · Tel. +49 7132 3818-0 · info@kaco-newenergy.de · www.kaco-newenergy.com...

This manual is also suitable for:

Blueplanet 3.7 nx1 m2Blueplanet 4.0 nx1 m2Blueplanet 5.0 nx1 m2

Table of Contents