Connecting To The 10/100 Ethernet Management And Ha Ports - Cisco SN 5428 Hardware Installation

Chapter 2 Installing the SN 5428 Storage Router
Connecting to the 10/100 Ethernet Management and
HA Ports
Step 1
Step 2
Step 3
OL-4796-01
To connect to the 10/100 management and HA ports, follow these steps:
Use modular, RJ-45, straight-through UTP cables to connect the 10/100
management and HA ports to end systems. Use modular, RJ-45 cross-connect
cables to connect to external switches and routers.
Connect the appropriate modular cables to the 10/100 management and HA ports.
(See Figure 2-17.)
Figure 2-17 Connecting to the 10/100 Management and HA Ports
Cable
To management
network equipment
Connect the other end of the cable to the external end system, switch, or router.

Connecting to the 10/100 Ethernet Management and HA Ports

To HA network
equipment
Cisco SN 5428 Storage Router Hardware Installation Guide
2-23