Verify That Network Connections Are Operational; Verify That Fibre Channel Connections Are Operational - Cisco SN 5428 Hardware Installation

Verifying Installation

Verify That Network Connections Are Operational

Step 1
Step 2
Step 3
Step 4

Verify That Fibre Channel Connections Are Operational

Step 1
Step 2
Cisco SN 5428 Storage Router Hardware Installation Guide
2-28
Verifying the network connections consists of making sure that the following
ports are operational: Gigabit Ethernet, 10/100 Ethernet management, and 10/100
HA.
To verify that the network connections are operational, perform the following
steps:
Verify the Gigabit Ethernet port connections by checking the port link status
LED. See Table 1-1 on page 1-6
Verify the 10/100 Ethernet management port connection by checking the port link
status LED. See Table 1-1 on page 1-6
Verify the 10/100 HA port connection by checking the port link status LED. See
Table 1-1 on page 1-6
If any of these conditions are not met, reference
isolate and, if possible, resolve the problem.
To verify that the connections are operational, perform the following steps:
Verify Fibre Channel port connections by checking Fibre Channel LOG LEDs.
See Table 1-1 on page 1-6
If the LOG LEDs for connected ports are flashing, reference
"Troubleshooting," to isolate and, if possible, resolve the problem.
Chapter 2
for LED indication descriptions.
for LED indication descriptions.
for LED indication descriptions.
for LED indication descriptions.
Installing the SN 5428 Storage Router
Chapter 3, "Troubleshooting,"
Chapter 3,
to
OL-4796-01