Mylar Tab Sfp Modules - Cisco SN 5428 Hardware Installation

Installing SFP Modules

Mylar Tab SFP Modules

Cisco SN 5428 Storage Router Hardware Installation Guide
2-14
The SFP modules have three different types of latching devices used to secure and
detach the SFP module from a port. The three types of SFP modules are described
in the following sections:
Mylar Tab SFP Modules, page 2-14
•
Actuator/Button SFP Modules, page 2-16
•
Bale Clasp SFP Modules, page 2-18
•
The Mylar tab SFP module (see
to remove the module from a port.
Figure 2-7 Mylar Tab SFP Module
To insert the Mylar tab SFP module into a port, line up the SFP module with the
port, and slide it into place (see
Chapter 2 Installing the SN 5428 Storage Router
Figure 2-7) has a tab that you must pull in order
Figure 2-8).
OL-4796-01