Using The Adf And Scanner Glass - Lexmark MX810 Series User Manual

Learning about the printer
•
Send a fax to multiple fax destinations at the same time.
• Scan documents and send them to your computer, an e-mail address, a flash drive, or an FTP destination.
•
Scan documents and send them to another printer (PDF through an FTP).

Using the ADF and scanner glass

Automatic document feeder (ADF)
Use the ADF for multiple‑page documents including two-
sided (duplex) pages.
You can use the ADF or the scanner glass to scan documents.
Using the ADF
When using the ADF:
•
Load the document into the ADF tray faceup, short edge first.
•
Load up to 150 sheets of plain paper into the ADF tray.
•
Scan sizes from 76.2 x 127 mm (3 x 5 inches) wide to 216 x 635 mm (8.5 x 25 inches) long
•
Scan media weighs from 52 to 120 g/m
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
Using the scanner glass
When using the scanner glass:
• Place a document facedown on the scanner glass in the corner with the green arrow.
• Scan or copy documents up to 216 x 355.6 mm (8.5 x 14 inches).
•
Copy books up to 25.3 mm (1 inch) thick.
Scanner glass
Use the scanner glass for single‑page documents, book pages,
small items (such as postcards or photos), transparencies, photo
paper, or thin media (such as magazine clippings).
2
(14–32 lb).
14