Installing An Optional Card - Lexmark MX810 Series User Manual
Mx810 series
Hide thumbs
Also See for MX810 Series:
- User manual (397 pages) ,
- Quick reference (34 pages) ,
- E-mail manual (4 pages)
Table of Contents
Advertisement
Additional printer setup
3
Align the notch (1) on the memory card with the ridge (2) on the connector.
4
Push the memory card straight into the connector, and then push the card toward the controller board wall until
it clicks into place.
5
Reattach the controller board shield, and then the controller board access cover.
Installing an optional card
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.
1
2
32
Advertisement
Table of Contents
