Lexmark MX810 Series User Manual page 126

Mx810 series
Hide thumbs Also See for MX810 Series:
Table of Contents

Advertisement

Faxing
To minimize interference between the two channels and ensure a quality connection, you need to install a DSL filter
for the analog devices (fax machine, telephone, answering machine) in your network. Interference causes noise and
static on the telephone, failed and poor quality faxes for the printer, and slow Internet connection on your computer.
To install a filter for the printer:
1
Connect the line port of the DSL filter to the wall jack.
2
Connect one end of the telephone cable that came with your printer to the
end to the phone port on the DSL filter.
3
To continue using a computer for Internet access, connect the computer to the DSL HPN port on the DSL filter.
4
To connect a telephone to the printer, remove any installed adapter plug from the
connect the telephone to the port.
Scenario 3: VoIP telephone service
port of the printer. Connect the other
port of the printer, and then
126

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xm7100 seriesMx811Mx812

Table of Contents