Misfeed In The Bypass Tray - Sharp MX-M200D Operation Manual

TROUBLESHOOTING AND MAINTENANCE
Section C
Remove the misfed original from the exit area.
If the misfed original cannot be easily removed
from the exit area, open the moveable part of the
document feeder tray and remove the original.

MISFEED IN THE BYPASS TRAY

1
Carefully remove the misfed paper
from the bypass tray.
2
Grasp the side cover handle and
gently open and close the side cover.
The message "
path." will be cleared and
copying will be possible.
If the message does not clear, check again
Note
to make sure that no pieces of paper
remain.
30
2
3
Clear paper
Open and close the RSPF to make the
misfeed location indicator stop
blinking.
Return the originals indicated by the
minus number in the display to the
document feeder tray and press the
[START] key ( ) .
Copying will resume from the originals that still
remained when the misfeed occurred.
Depending on the location of the misfeed,
Note
the displayed number of originals to be
returned to the document feeder tray may
not be correct.
You can also make the
misfeed indicator stop
blinking by opening and
closing the feeding roller
cover or the right side
cover.